Table of Contents
Previous Page | Next Page
TT700
11
INSERTING THE WOUND BOBBIN
1. Insert wound bobbin into bobbin case with
thread spooling off to left side, as shown.
2. Guide end of thread to the back of the
bobbin.
3. Pull the thread toward you so that it hooks
on notch A (at 3 o'clock position) and then
pull to the left so that it passes through
notch B (at 4 o'clock position).
4. Leave several inches of thread laying
across top of bobbin toward the left of
machine. Slide cover back into position
ready for sewing.
Caution: If lower thread is not fixed
properly, the thread will be
very loose after sewing.
Bobbin threading is now complete.
(See Page 9 to raise lower thread for sewing)
