37
Step3 Switch
SP FL CL DD
UP
OFF
UP
OFF
Display (C)
Setscrew (A)
(Sewing mode)
The driving arm (1) is
raised.
(Cutting mode)
The driving arm (1) is
lowered.
Switch
Driving arm (1)
Driving arm
(1)
1. While pressing the needle up/down and lock
stitch buttons, turn the power switch on. Press
the number “9” within 3 seconds.
2. Remove the machine base and auto thread
cutter cover (refer to pages 2 and 3).
3. Set the needle bar at the lowest position.
4. Loosen the setscrew (A) and adjust the position
of the switch (B) as follows:
* When the driving arm (1) is lowered, the
display (C) shows “ON”.
* When the driving arm (1) is raised, the
display (C) shows “OFF”.
5. Attach the machine base and auto thread cutter
cover.
TO ADJUST AUTO THREAD CUTTER SWITCH POSITION
