Singer SHG 2627, Инструкция по эксплуатации

Страница: 6 / 22

4
2. Set the temperature dial to the required ironing temperature by turning it to the
appropriate temperature indication.
3. Insert the plug into an earthed wall socket and set the on/off switch to “on”.
The steam tank and the iron will now start heating up.
The iron takes approx. 1 minute to heat up to and the steam tank takes approx.
2.5 minutes to heat up.
As soon as the steam tank is ready for steam ironing, the steam tank pilot light goes on
Tips
- If the article consists of various kind of fiber, always select the temperature required by
the most delicate fiber, i.e. the lowest temperature. If, for example, the fabric consists
of 60% polyester and 40% cotton, it should be ironed at the temperature indicated for
polyester ( ).
- If you do not know what kind of fabric(s) the article is made of, determine the right
ironing temperature by ironing a part that will not be visible when you wear or use the
article.
- Silk, woolen and synthetic materials: Iron the reverse side of the fabric to prevent shiny
patches.
- Fabrics that tend to acquire shiny patches should be ironed in one direction only (along
with the nap ) while applying very little pressure.
- Start ironing the articles that require the lowest ironing temperature, i.e. those made of
synthetic materials
To make the iron cool down faster, simply apply steam or iron a piece of cloth.
USING THE APPLIANCE
Steam ironing
The supply hose may become hot during a long ironing session.
- The system may occasionally produce a pumping sound during steam ironing. This is
normal and tells you that water is being pumped into the steam tank.
1. Make sure there is enough water in the water tank.
- Steam ironing is only possible at higher ironing temperatures (higher than ).
- During steam ironing, the “steam ready light” goes on from time to time to indicate
temperature.
- The opening and closing of the steam valve in the steam tank will cause a clicking
sound. This is perfectly.
Ironing without steam
1. Start ironing without pressing the steam activator or switch the steam rate dial to close
position.
Ironing without steam
1. Put the iron on the stand.
2. Switch the appliance off.
3. Remove the mains plug from the wall socket and let the iron cool down.
FEATURES
Vertical steaming
Never direct the steam at people.
- You can steam iron hanging curtains and clothes (jackets, suits, coats) by holding the
iron in vertical position and pressing the steam activator.
CLEANING AND MAINTENANCE
After each use
Never immerse the iron in water nor rinse it under the tap.
1. Clean the iron with a damp cloth.
2. Wipe scale and any other deposits off the soleplate with a damp cloth and a non-
abrasive cleaning agent.
Calc Clean