Singer SHG 2627, Инструкция по эксплуатации

Страница: 5 / 22

3
BEFORE FIRST USE
- The iron may give off some smoke when you use it for the first time. This is normal and
will stop after a short while.
- White particles may out of the soleplate when you use the iron for the first time. This
is normal; The particles are harmless and will stop coming out of the iron after a short
while.
- When you switch the appliance on, the steam tank may produce a pumping sound.
This is normal; the sound tells you that water is being pumped into the steam tank.
1. Remove any sticker or protective foil from the soleplate and clean the soleplate with
a soft cloth.
2. Place the steam tank on a stable and level surface, i.e. on the ironing board or on a
table.
PREPARING FOR USE
Filling the detachable water tank
- If the tap water in your area is very hard, We advise you to use the demineralised
water.
- Do not put perfume, vinegar, starch, descaling agents, ironing aids, other chemicals or
100 percent distilled water in the water tank.
1. Remove the detachable water tank from the steam tank.
2. Fill the water tank with water up to the MAX indication.
3. Slide the water tank back into the steam tank.
Setting the temperature
1. Check the garment label for the required ironing temperature
Synthetic fabrics (e.g. acryl, viscose, polyamide) and silk
Wool
Cotton
MAX
Linen
ENG
A
H
I
J
B
D
F
C
E
G
K