Singer SGR-500LCD, Инструкция по эксплуатации, Страница: 13 / 52

13
ENGLISH
REPLACING ANTI-CAL CARTRIDGE
According to water hardness, the logo will be goes on to remind your re-
place the new cartridge.
1.
Connect the appliance to a suitable mains supply outlet.
2. Keep your appliance remain ON mode
3. Release water tank
4. Slide out the anti-cal cartridge container and replace anti-cal cartridge.
5. Wait for 5 seconds after Step 4 to reinstall the anti-cal cartridge container.
6. Reinstall the water tank.
Note:
1. Anti-cal cartridge cannot be removed unless water tank is slide out
2. If the anti-cal cartridge container is not properly installed, the “anti-calc
missing logo”
will be goes on with continuous “beep” sounds.
3. If anti-cal cartridge is replaced during OFF mode, the anti-cal electronic
system will not recognize a new cartridge has been change.
Important:
1. Please do not attempt to use the exhausted anti-cal cartridge. This will
cause damage to the appliance and the electronic system.
2. Please do not left the anti-cal cartridge container empty. This will cause
damage to the appliance and the electronic system.
For the better performance immerse the
anti-cal cartridge in water 5minutes before
fi rst usage.
SPRAYING
This function can be used any time and is not affect any setting.
1.
Remove the spray button as per fi g 7
2. Fill the water tank as per fi g 8
3. Replace the water tank in its place.
4. Aim the nozzle to the garment. Press the Spray Button.
Note: It may be necessary to press the spray button a few times to start this
function.