Singer SDHM-16L PURE DRY ION, Инструкция по эксплуатации, Страница: 14 / 92

14
ENGLISH
the setting time exceeds 24h, the fi gure returns to 1 to start cycle. The Timer
button can also be pressed all the time, the time increases and changes
circularly. When the set time expires, the dehumidi
fi er turns off automatically.
After the setting is completed, if the Timer button does not act at all within
5s, the set time is con
fi rmed. In timer off state the button lamp on the Timer
button is normally on.
Setting of timer on
• When the dehumidi fi er is in standby state, the method for adjustment of
setting time by the [Timer button] is the same as timer off. After the setting
is completed, if the Timer button does not act at all within 5s, the set time is
con
fi rmed. In timer on state the button lamp on the Timer button is normally
on, and the set time is displayed on control panel.
AUTO mode
• Select AUTO mode, if the room humidity is high than the set humidity or
is b5% or -5% of the set humidity, the compressor will starts and
the fan will run at the set speed. If the room humidity is lower than the set
humidity by -5%, then the compressor will stop but the fan will run at the set
speed. The default set humidity value is 50%.
CONTINUOUS mode
• Select CONTINUOUS dehumidi fi cation, no matter how the relative humidity
in the room is, the compressor starts, the fan runs at high speed in default,
and the air speed can be regulated via the air speed button.
DRYING function in dehumidi fi er
• Press the Dry button, to start drying internally the dehumidi fi er. The whole
drying procedure needs approximate 1h:
a) The dehumidi fi er starts at HIGH air speed and releases air continuously
for 30min.
b) The dehumidi fi er continues to run at LOW air speed and lasts for 20min.
• How to stop:
Press the button again to cancel drying in dehumidi
fi er, and recover to the
running state before start of drying.
Press the Power button to stop drying in dehumidi
fi er and recover to the
standby state.