Singer 6199, Инструкция по эксплуатации

Страница: 46 / 52

44
After using, keep sewing machine and footcontroller clean, use dry rags to remove dust
from the sewing machine and footcontroller.
NOTE: Use dry rags to avoid electrical shock.
1. Remove the bobbin case from the shuttle.
2. Push aside the two shuttle keepers.
3. Remove the shuttle race cover and shuttle.
1. Be sure the shuttle race forms a half moon on the left side of the machine.
2. Holding the shuttle by its center pin, replace it so as to form a half moon on the right
side.
3. Slide the shuttle race cover back into position.
4. Snap the shuttle keepers back into position.
NOTE: Put a drop of sewing machine oil on the center pin of the shuttle and
shuttle race as indicated by the large arrows in step B.
A.
B.
C.
D.
Raise the needle to its highest position.
Clean the feed dogs and shuttle area with the lint brush.
CLEANING THE SEWING MACHINE AND FOOTCONTROLLER
CLEANING THE FEED DOGS AND SHUTTLE AREA
(
4
)
Feed dogs
Shuttle race Bobbin case
Shuttle race cover
Shuttle
Shuttle keeper
(
1
)
(
2
)
(
3
)
D