Singer 6199, Инструкция по эксплуатации

Страница: 27 / 52

25
6
3
4
2
5
STRAIGHT STITCHING
Straight stitch is most frequently used for
all types of sewing. Begin by following the
steps below.
NOTE: Based upon the weight of
the fabric, slight “fine tuning” of the
tension may be desired.
A.Thread tension control
B. Reverse stitch button
C. Presser foot lifter
1. SETTINGS
Presser foot - All Purpose Foot
Thread tension control - 5
6. First turn the hand wheel toward you
(counter-clockwise) until the needle
is at its highest position. Raise the
presser foot, draw materials to the
rear and cut off excess thread with the
thread cutter located on the bottom of
face cover as shown.
2. Pull both threads under the presser
foot toward the back of the machine,
leaving about 6” (15cm) tail
3. Place the fabric under the presser foot
and lower the presser foot lifter.
4. Turn the hand wheel toward you
(counter-clockwise) until the needle
enters the fabric.
5. Start the machine. Guide the fabric
gently with your hands. When reaching
the edge of the material, stop the
sewing machine.
NOTE: To secure the stitching and
avoid raveling, press the reverse
stitch switch and sew a few stitches
at the start and end of the seam.
NOTE: The Needle Plate has both
Metric and Inch Markings as an aid
for guiding your fabric when sewing
a seam.
A
C
B
1