Singer Instruments ROTOR HDA, Руководство пользователя

Страница: 23 / 30

23
singerinstruments.com
grAPHIcAl InTErFAcE
·
All functions controlled by simple pictograms.
includes replication, array generation and mating
SOFTWArE
·
commands include automatic and manual offset pinning
to ensure even repeat cell pick up from colonies and
automatic stirring mode for re-suspention in microtitre
wells.
remote access and diagnostics and other protocols are
under continuous development.
InTErFAcES
·
1x ethernet
·
2x UsB
·
1x 25232
·
1x kB/Ms/LAN2
lIgHTIng/DISInFEcTIOn
·
white
·
UVc
cOMPrESSOr
·
compressor type may vary, please consult your singer
Technician.
·
Our standard compressor is very quiet and performs
optimally standing on the floor. it has a reservoir inside
it and will run only intermittently. The pipe connecting
the compressor to the rOTOr HdA is
6mm dia (1/4”) . The
compressor may be sited away from the rOTOr HdA
(please let us know about this so that we can supply a long
enough pipe)
.
·
120v or 230v versions of our standard compressor are
available.
·
Power: 500W .
AIr/gAS cOnnEcTIOn
where we do not supply a compressor, the rOTOr HdA
is supplied with a male quick-change coupler. we will
supply, in advance, the female mating part to this, so that
you can arrange connection before installation.
PErFOrMAncE
The rOTOr HdA is manually loaded and unloaded,
but very special attention has been paid to speed of
replication. The turntable, which conveys plates in and
out of the sealed operating zone of the rOTOr HdA, may
be unloaded and loaded whilst replication is in progress.
This makes the process very continuous.
Performance tests carried out for singer by a major
yeast laboratory claim replication rates in excess of 100
PlusPlates™ per hour.
At the supported densities, this equates to:
·
96: 9,600 colonies
·
384: 38,400 colonies
·
768: 76,800 colonies
·
1536: 153,600 colonies
·
6144: 614,400 colonies
cOnSUMAblES
·
singer PlusPlates
™
: standard footprint, single well
plate with specially extended working area for rePad
™
compatibility and meniscus allowance.
·
rePads™: 96 long
384 long
96 Short
384 Short
1536 Short
6144 Short
All consumables are made of plastic and are gamma
irradiated and double packed.
Pack sizes:
·
PlusPlates™: 10 per sleeve/ 200 per box
·
Long 96: 10 per sleeve/ 200 per box
·
Long 384: 10 per sleeve/ 200 per box
·
short 96: 20 per sleeve/ 1000 per box
·
short 384: 20 per sleeve/ 1000 per box
·
short 1536: 20 per sleeve/1000 per box
·
short 6411: 20 per sleeve/1000 per box
running costs
·
running costs of the rOTOr HdA are much lower than
those of conventional robots, particularly when speed and
density are taken into account.
·
eXAMPLe: At a rate of 100 plate replications per hour
at a density of 1536, 153600 colonies can be printed. 100
PlusPlates™ and 100 rePads™ cost approximately Us
$240* so cost per colony is only $0.0015.
There are no solvent or detergent costs, or costs
associated with a dedicated technician.
SAFETY AnD cOMPlIAncE
·
safety interlocks on vision panel and rear control panel.
·
UV lamp operation is under software control and is
interlocked with main, roller cover closure.
·
ce compliance by technical file.
*Price correct at time of printing. exchange rates fluctuate monthly.
tecHnical specifications