Singcall APE1200, Руководство пользователя

Страница: 4 / 33

4
5) Press the key [ENT] and [F7] appears again.
6) Press the key [ESC], back to standby mode.
◆
Number display mode setting
( all-digital display or digits beginning with an English letter,
for APE1200/APE1500/APE1800/APE1900/APE2000/APE2500/APE2600/APE2900/APE9500 )
1) Standby mode, press the key [FUN] for 3 seconds till [F1] appears on the screen.
2) Use the key [UP] to choose [F8].
3) Press the key [ENT] and [01] appears.
4) Use the key [UP], [MOVE], or [DOWN] to choose a number. 01~10 is all-digital display (default
setting), and 11~20 is digits beginning with an English letter ( A,B,C,D,E,F,H,P,J or L) display.
5) Press the key [ENT] and [F8] appears on the screen.
6) Press the key [ESC], back to standby mode.
◆
Same or different sounds for multi buttons
(forAPE1600/APE1800/APE2500/APE9600)
1) Standby mode, press the key [FUN] for 3 seconds till [F1] appears.
2) Use the key [UP] to choose [F8] (for APE1600/APE9600) or [F9] (for APE1800 / APE2500)
3) Press the key [ENT] and [00] appears on the screen.
4) Use the key [UP] or [DOWN] to choose a number. [01] means the same sound for different
buttons and [00] means different sounds for different buttons (default setting).
5) Press the key [ENT] and [F8] or [F9] appears on the screen.
6) Press the key [ESC] and back to standby mode.
Special Instruction for APE8000
◆
Register the remote controller
1) Press the key [D] on standby mode (time display mode) and [F1] appears on the screen.
2) Press the key [D] again and the screen is on standby
3) Press the key [B] and [F1] appears on the screen.
4) Press the key [B] again and the registration is done.
Note: All the register steps should be finished within 2 minutes after the receiver is turned on.
The remote controller should be registered again when the receiver is turned on every time.
◆
Specific Methods of Operation Are the Same with Other Hosts
The following is illustrations for each function key:
D: [FUN] (function-option key) / [ENT](enter)
B: [ESC] (escape)
A: [MOVE] (move)
C: [UP]
（
up
）
Volume adjustment:
1) Standby mode, press the key [C] to adjust the volume. Number 01~15 means 15 kinds of
volume.
2) Press the key [B], back to standby mode and the volume setting is done.