Sinexcel PWS2-30M-EX, Руководство пользователя

Страница: 44 / 49

- 40 -
If the fault persists, please contact Sinexcel
Electric Customer Service Center.
22 AC soft start F AC relay does not close properly
If the fault occurs repeatedly, please
contact Sinexcel Electric Customer Service
Center.
23 UI soft start F Fail in the process of inverter soft start.
If the fault occurs repeatedly, please
contact Sinexcel Electric Customer Service
Center.
24 AC switch ON F AC relay cannot be closed normally.
If the fault occurs repeatedly, please
contact Sinexcel Electric Customer Service
Center.
25 U2 fault
U2 board with U1 board communication is
disconnected.
Wait for the inverter to return to normal.
If the fault occurs repeatedly, please
contact Sinexcel Electric Customer Service
Center.
26 DC Component F
DC component in the AC output current
value exceeds 1A.
Wait for the inverter to return to normal.
If the fault occurs repeatedly, please
contact Sinexcel Electric Customer Service
Center.
27 Sampling fault
Inconsistent sampling values of master
controller and slave controller
Wait for the inverter to return to normal.
If the fault occurs repeatedly, please
contact Sinexcel Electric Customer Service
Center.
28 EEPROM1 read E
U1 board EEPROM read error during
initialization
If this fault occurs, please re-power and
restart the inverter. If the fault persists after
repeated operation several times, please
contact Sinexcel Electric Customer Service
Center.
29 EEPROM2 read E
U1 board EEPROM read error during
initialization.
If this fault occurs, please re-power and
restart the inverter. If the fault persists after
repeated operation several times, please
contact Sinexcel Electric Customer Service
Center.
2A EEPROM3 read E
U1 board EEPROM read error during
initialization
If this fault occurs, please re-power and
restart the inverter. If the fault persists after
repeated operation several times, please
contact Sinexcel Electric Customer Service
Center.
2B Over-load
There is an overload in the AC of inverter.
Load needs to be reduced. Otherwise,
shutdown will occur due to timeout.
Reduce the load.
If the fault persists, please contact Sinexcel
Electric Customer Service Center.If the
fault persists, please contact Sinexcel
Electric Customer Service Center.