Sindoh 3Dwox DP102, Руководство пользователя

Страница: 9 / 28

9
Slicer Program Manual
Detail description
3D Model Viewer
This mode renders the 3D model loaded and displays it on the screen.
In this mode user is able to change position, angle and size of the 3D model and print it out.
Support Edit Viewer
When the model contains a slant surface, s support is needed at the bottom of the model to ensure
good printing output. Hence, in this mode user is given the accessible views to position the support
at the right location.
Layer Viewer
This mode slices the 3D model to print. Pressing this button allows user to slice 3d model parallel to
the printer bed by reflecting parameter values, and to display the layers.
Moving a model
Moves the model on screen in directions of x and y axes.
Moves (in mm) a selected model in 2 axes.
Applies values to model.(Equivalent to Enter key)
Place the selected model in the center of the bed.
Moves the selected model to the location where it was initially loaded.