Sinclair SYMPHONY MS-H09AISW PT, Руководство пользователя

Страница: 7 / 30

4
Introduction for buttons on remote controller
Press this button to set up &down swing angle, which circularly changes as below:
OFF
This remote controller is universal. If any command , or is sent out,
the unit will carry out the command as
indicates the guide louver swings as:
Press this button to turn on I FEEL function. The unit automatically adjust temperature according
to the sensed temperature. Press this button again to cancel I FEEL function.
I FEEL:
SWING:
ON/OFF
:
MODE :
+
:
AUTO COOL DRY FAN HEAT
*
*Note:Only for models with heating function.
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be
displayed on the LCD, and the unit will automatically select the suitable operation mode in
accordance with the room temperature to make indoor room comfortable.(As for cooling only unit,
it won’t have any action when it receives the signal of heating operation.)
This button is used for setting Fan Speed in the sequence that goes from AUTO,
to
then back to Auto.
,
,
,
,
1
2
3
4
5
6
Press this button to decrease set temperature. Holding it down above 2 seconds rapidly decreases
set temperature. In AUTO mode, set temperature is not adjustable.
Press this button to increase set temperature. Holding it down above 2 seconds rapidly increases set
Auto
Medium speed Low-Medium speed Low speed
High speed Medium-High speed
Each time you press this button , a mode is selected in a sequence that goes from AUTO,
COOL, DRY, FAN, and HEAT
* , as the following:
:
Press this button to turn on the unit. Press this button again to turn off the unit.
temperature. In AUTO mode, set temperature is not adjustable.
FAN: