Sinclair SF-51H, Руководство пользователя

Страница: 15 / 32

Fan Coil Unit Wall Mounted Type
11
4.3.7 Energy Saving Setting (Fig.4)
.
(1) In the status of OFF , press the button
FAN and ▼ simultaneously for 5seconds,
the SAVE menu will appear and comes to
the energy saving settings of cooling and dry
(showing
SAVE + COOL , for the first time
of setting, the initial temperature is 26);then
press
MODE button, it changes to energy
saving setting of heating mode (showing
SAVE + HEAT , for the time of setting, the
initial temperature is 20
℃
); The upper limit
temp. is set at the SET TEMP , the lower
temp. limit is set at the ROOM TEMP . ,
press ON/OFF button to switch over the
upper/lower temp. limit setting, press ▲ and
▼ to adjust the temperature(the range is
16~30
℃
). After finishing the setting ,press
FAN and ▼ simultaneously again for 5 seconds, and exit the SAVE menu.
(2) After the operation above , SAVE will be display on the liquid crystal panel, then neither the
remote controller nor the wired controller the user use to set the temperature, the SET TEMP. will
not exceed the range that has been set. For example, in the Fig.2 we set temp. range from 23
℃
to 28
℃
,then the user can only adjust the
temp. between 23
℃
and 28
℃
by the remote
controller or the wired controller.
(3) If the upper limit is the same with the
lower limit that the system can only run at
this temperature.
(4) To cancel the energy saving, press
the button of FAN and ▼ simultaneously for
5 seconds in the status of OFF , but temp.
limit will be keep until next time to set the
energy saving function.
(5) After the power cut, the energy
saving function will still be store in memory.
NOTE: The upper limit can not be lower
than the lower limit, or else the system will
default the higher one to be upper limit, if
there is no operation in 20 seconds, the
SAVE
menu will automatically shut down.
4.3.8 Memory function (Fig.5)
Press the MODE button for 10 seconds in the OFF status, the memory function can be switch
over., If“ 01 ”is showed,it means the memory function is on,or else if “ 02 ”is showed, it means the
memory function is off. Press ON/OFF button to exit. If there is no operation is 20 seconds, the
memory function menu will be shut of and the present setting will be stored.
Fiig.5
MO DE
ON /OFF
TIMER
SWING
FAN
COOL
MO DE
ON /OFF
TIMER
SWING
FAN
Fiig.4