Sinclair SF-51H, Руководство пользователя

Страница: 14 / 32

Fan Coil Unit Wall Mounted Type
10
4.3 Wired Controller Operation
4.3.1 ON/OFF
(1) Press “ ON/OFF ” button this unit will start working.
(2) Press “ ON/OFF ” button again, this unit will stop working.
4.3.2 FAN
(1) This fan runs at the following speed:
(2) Dry mode: the fan speed will be automatically set to LOW.
4.3.3 TEMP ADJUST
(1) Press TEMP ADJUST key
▲: Press it to increase the temp;
▼: Press it to decrease the temp.
(Press the key once to change the temp. by 1
℃
each time.)
(2) The temp. range in each operation mode:
HEAT ----------16
℃
- 30
℃
;
COOL ---------16
℃
- 30
℃
;
DRY -----------16
℃
- 30
℃
;
FAN -----------Can not set temp.
4.3.4 SET SWING
(1) Press the SWING button, the swing function will be ative.
(2) Press again to stop the swing function.
4.3.5 SET MODE
Every time press this key to change the operation mode in order of:
(1) In “ COOL ” mode, COOL key will be lighted and set temp. must be lower than temp. If set
temp. is higher than room temp. , this unit won’t run in COOL mode and only fan can operate.
(2) In “ DRY ” mode, DRY key will be lighted and internal fan will work at high speed within a
certain temp. range. This mode is more efficient than DRY function in COOL mode and it can save
the energy.
(3) In “ HEAT ” mode , HEAT key will be lighted. Set temp. must be higher than the room temp. ;
If set temp, is lower than the room temp., this unit won’t run the HEAT mode.
(4) In “ FAN ” mode , FAN key will be lighted. In the meantime. The room temp. can’t be adjust ,
but it will be shown on the LCD of the controller.
4.3.6 SET TIMER
Starting time can be set in OFF mode and stopping time can be set in ON mode. Press the
TIMER button to set timer, press the ▲ button (or the ▼ button) once, set time will be raised (or
reduced) by 0.5h, then press TIMER button again to confirmThe range of set time is 0.5h~24h.