Sinclair SDV5 Series, Руководство по обслуживанию

Страница: 7 / 45

4 201805
3 Unit Placement
3.1 Placement Considerations
Unit placement should take account of the following considerations:

Units should not be installed in the following locations:

Where exposure to direct radiation from a high-temperature heat source or to interference from a source of
electromagnetic radiation may occur.

Where dust or dirt may affect heat exchangers.

Where exposure to oil or to corrosive or harmful gases, such as acidic or alkaline gases, may occur.

Where exposure to salinity may occur, such as seaside locations.

Where highly flammable materials are present.

Where exposure to oily air may occur, such as a kitchen.

Where exposure to very high humidity may occur, such as a laundry.

Units should be installed in positions where:

The ceiling is horizontal and is able to bear the unit’s weight.

There are no obstructions that could impede the airflow into and out of the unit.

The airflow out of the unit can reach throughout the room.

There is sufficient space for access during installation, servicing and maintenance.

The refrigerant piping and drain piping can be easily connected to the refrigerant piping and drain piping
systems.

Short-circuit ventilation (where outlet air returns quickly to a unit’s air inlet) will not occur.
3.2 Space Requirements
Figure 3.1: Ceiling & floor space requirements (unit: mm)
>600mm
>
6
0
0
m
m
600mm
> 20
Air Outlet
Obstacle
Piping connection
Obstacle
Drop ceiling
Air Outlet