4.
Optional 3,5mm jacks and ZX96 bus diodes
If needed additional 3,5mm jacks can be soldered on the MrX sound card on J1 and J2.
For the ZX96 bus (
http://www.fischerkai.de/zxteam/treib_e.htm
)
a diode DX1 for the /BUSCS
signal has to be soldered and the port connector has to be exchanged by a VG64 connector. The
VG64 connector uses all pins of K2.
Note: The ZX96 bus is only used by some freaks, if your ZX81 is equipped with the same the
original MrX won't fit mechanically.
Version: v005
7
Date: 22.05.2012
