manualshive.com logo in svg

Sinclair MC-F09AI, Руководство пользователя

Поделиться
Скачать
Sinclair MC-F09AI Скачать руководство пользователя страница 6

Wired Controller XK19

3

2.2  Function of the Buttons

Table 2

No.

Name

Function

1

Enter/cancel

① 

Function selection and cancellation.

② 

Press it for 5s to examine the outdoor ambient temperature. 

2

▲

① 

Running temperature setting of the indoor unit, range:16

～

30

℃ .

② 

Timer setting, range:0.5-24 hr.

③ 

Switchover between quiet/auto quiet or among sleep1/sleep2/sleep 3.

6

▼

3

Fan

Setting of the high/middle/low/auto fan speed.

4

Mode

Setting of the Cooling/Heating/Fan/Dry mode of the indoor unit.

5

Function

Switchover among the functions of Swing/Sleep/Turbo

/

Save/E-heater/Blow /

Quiet etc.

7

Timer

Timer setting.

8

On/Off

Turn on/off the indoor unit.

4+2 

▲+Mode

Press them for 5s under off state of the unit to enter/cancel the Memory function

(If memory is set, indoor unit after power failure and then power recovery will

resume the original setting state. If not, the indoor unit is defaulted to be off after

power recovery. Memory off is default before delivery.).

3 +6 

Fan+▼

By pressing them at the same time under off state of the unit,   will be displayed

on the wired controller for the cooling only unit, while   will be displayed on 

the wired controller for the cooling and heating unit.

2 +6

 

▲+▼

Upon startup of the unit without malfunction or under off state of the unit,press

them at the same time for 5s to enter the lock state, in which case, any other 

buttons won’t respond the press. Repress them for 5s to quit this state.

3  Operation Instructions

3.1  On/Off

Press On/Off to turn on the unit and turn it off by another press.
Note: The state shown in Fig.4 indicates the “Off” state of the unit after power on. The state shown in 

Fig.5 indicates the “On” state of the unit after power on.

                              Fig. 4 “Off” State                                                             Fig. 5 “On” State

3.2  Mode Setting

Under the “On” state of the unit, press Mode to switch the operation modes as the following sequence: 

Cooling-Dry-Fan-Heating.

Содержание MC-F09AI








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды