Wireless Remote Controller YT1F
20
This kind of remoter controller is universal. And the three swing statuses of
are the same
as that of
.
If the swing function is deactivated when the air guide louver is swing up and down, it will stop at the
current position.
indicates that the air guide louver swings up and down among all five positions.
13) AIR (
)
AIR ON or Air OFF can be selected by pressing this button.
14) TIMER ON
“ON” will be displayed and blink for 5 seconds by pressing this button, and soon adjust the time by
pressing
＋
or
－
within 5 seconds. Each press will make the time increased or decreased by 1 minute. If
the button is pressed down for more than 2 seconds, the time will be changed quickly in such a way: firstly
the value on the one’s place is changed and then is the value on the ten’s place. Once Timer ON has been set
already, it can be canceled by repressing it. Before the setting, please adjust the CLOCK to the current actual
time.
15) TIMER OFF
TIME OFF can be activated by pressing this button, with “OFF” blinking. The method of setting is the
same as that for TIMER ON.
16) HEALTH (
)
This function can be activated or deactivated by pressing this button. After the unit is turned on, the
default is HEALTH ON.
17) I FEEL
This function can be activated by pressing this button and canceled by another press. When this function
is on, the I FEEL information will be sent out in 200ms after each operation on the controller and the remote
controller will send the temperature information to the main controller every 10 minutes.
2 Guide for General Operation
a. After powered on, press ON/OFF and then the unit will start to run. (Note: when powered off, the
guide louver of the main unit will close automatically).
b. Press MODE to select the desired running mode.
c. Press
＋
or
－
to set the desired temperature (it is unnecessary to set the temperature under the AUTO
mode.)
d. Press FAN to set the fan speed, AUTO, LOW, MID, or HIGH.
e. Press to select the swing angle.
3 Guide for Optional Operation
a. About BLOW
This function indicates that moisture in the evaporator of the indoor unit will be dried after the unit is
stopped to avoid mould.
① .
BLOW ON: When press the ON/OFF button to turn off the unit, the indoor fan will continue running
for about another 10 minutes at the low speed. In this case, the indoor fan can be stopped directly by pressing
the button BLOW.
Содержание MC-F09AI
Страница 1: ...USER S MANUAL MULTI COMBI SERIES FLOOR CEILING MC F09 12 18 24AI ...
Страница 2: ......
