Sinclair KJR- 90D, Инструкция по установке и эксплуатации

Страница: 10 / 14

7
INSTALLATION
1 Safet y precautions
Read the safety precautions carefully, stated below are important safety issues that
must be obeyed
WARNING
•
Please entrust the distributor or professionals to install the unit, do not install
the unit by the user.
•
Do not uninstall the unit randomly.
•
The
wiring should adapt to the wire controller current.
•
The specified cables shall be applied in the wiring. No external force may be
applied to the terminal.
2 INSTALLATION ACCESSO RIES
Please confirm that all the following parts you have been supply.
Number Name
Qty
Remark
1 Wire controller 1
—
2
M4×25 cruciform slot screw
2
This accesory is used when install
the wire control inside the electric cabinet
3
Installation and operation manual
1
—
4
Plastic bolt
2
This accessory is used when install
the wire control inside the electric cabinet
5
The connective wires of signal
received panel
1
For connect between the signal
received wire and shielded 5
-core
cable
•
The circuit of wire controller is low voltage circuit, do not contact to the high
voltage circuit and can not be arranged in the same wiring pipe with the high circuit,
the distance between the wiring pipes should at least more than 300
-500 mm.
•
Do not connect transition or extended connection in the middle of the wirings
of the wire controller.