Sinclair GSH-IRAD, Руководство пользователя

Страница: 12 / 24

Section - More...
2. circ - secondary circuit mixing valve opening
2. equi. - temperature computed by equithermal curve for secondary circuit
2. outp. - output water temperature for secondary circuit
Outdoor temp. - outdoor temperature
Comp. - compressor speed
Vent. - ventilator speed
Hours in use - number of operation hours of heat pump
Section - Calorimeter
Water flow - water flow through indoor unit
Actual power - actual power supplied by heat pump
Supplied power - power supplied since last calorimeter reset
Circulator power - actual circulator power
Water pressure - water pressure inside of system
Out./In. - water temperature output / input
Section - Status Errors
Code of states and errors - four-digit code (read from left)
1. digit: 1 - Freeze protection (output water temperature dropped below safe limits)
2 - Insufficient water flow (water flow dropped below safe limits)
3 - Outdoor unit disorder
4 - Low water pressure (water pressure dropped below 0,9 Bar)
5 - Faulty temperature sensor MX (communication unit)
2. digit: 1,2 - Faulty output water temperature sensor
3,4 - Faulty input water temperature sensor
3. digit: 1,2 - Faulty pool temperature sensor
3,4 - Faulty secondary circuit temperature sensor
4. digit: Faulty outdoor temperature sensor 1,2 -
3,4 - Faulty object temperature sensor
5,6 - Faulty DHW temperature sensor
7,8 - Faulty accumulatice tank temperature sensor
First two digits from left indicate critical error, in which is heat pump operation stopped or limited.
Autoreset - Function of error autoreset. If the error disappears, heat pump is again put into operation. This could
happen maximum 5 times, autoreset function is deactivated thereafter.
Error history - Error history records last 10 errors.
Description of sections
- Overview - main screen