manualshive.com logo in svg

Sinclair ASH-13AIA PT, Руководство пользователя

Поделиться
Скачать
Sinclair ASH-13AIA PT Скачать руководство пользователя страница 17

Function introduction for combination buttons

About X-FAN function

This function indicates that moisture on evaporator of indoor unit will be blowed after

the unit is stopped to avoid mould.

indoor fan will continue running for about 2 min. at low speed. In this period, press
X-FAN button to stop indoor fan directly.

1. Having set X-FAN function on: After turning off the unit by pressing ON/OFF button

the complete unit will be off directly.

2. Having set X-FAN function off: After turning off the unit by pressing ON/OFF button,

About AUTO RUN

When AUTO RUN mode is selected, the setting temperature will not be displayed on 
the LCD, the unit will be in accordance with the room temp. automatically to select the
suitable running method and to make ambient comfortable.

About lock

Press + and - buttons simultaneously to lock or unlock the keyboard. If the remote co-
ntroller is locked, the icon      will be displayed on it, in which case, press any button, 

the mark will flicker for three times. If the keyboard is unlocked, the mark will disappear.

About switch between Fahrenheit and Centigrade

Under status of unit off, press MODE and - buttons simultaneously to switch 

℃

 and 

℉

.

18

Содержание ASH-13AIA PT











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды