Sinclair ASC-XXAIN, Руководство пользователя

Страница: 42 / 52

◆
“88” Display:
When there is no error, and it receives valid remote control information. It will display the temp
setup for 5s, then display the temp of indoor. When the unit has error, It will display the error code.
When there are more than one error, the error code will be displayed alternately.
After the grille of the front panel is opened, the front panel is still allowed to realize the following
functions by pressing the “Auto” button and the nearby “Test” button simultaneously for five seconds
when the unit is “Off”.
6.2 Working Temperature Range
Table12
Test Condition
Indoor Side Outdoor Side
DB(°C) WB(°C) DB(°C) WB(°C)
Nominal Cooling 27 19 35 24
Nominal Heating 20 − 7 6
Rated Cooling 32 23 48 −
Low Temp. Cooling 21 15 -15 −
Rated Heating 27 − 24 18
Low Temp. Heating 20 − -10 -11
Note:
① .
The design of this unit conforms to the requirements of EN14511 standard.
② .
The air volume is measured at the relevant standard external static pressure.
③ .
Cooling (heating) capacity stated above is measured under nominal working conditions
corresponding to standard external static pressure. The parameters are subject to change with
the improvement of products, in which case the values on nameplate shall prevail.
④ .
In this table, there are two outside DB values under the low temp cooling conditions, and the
one in the brackets is for the unit which can operate at extreme low temperature.