manualshive.com logo in svg

Sinclair ASC-XXAIN, Руководство пользователя

Поделиться
Скачать
Sinclair ASC-XXAIN Скачать руководство пользователя страница 16

Wired Controller XK60

2 Press Buttons

2.1 Buttons

Fig.3 Press Buttons

2.2 Instruction to the Function of Press Buttons

Table 2

No.

Press Buttons

Function Introduction

1

Enter/Cancel

① .

Function selection and canceling;

② .

Press it for 5s to enquiry the outdoor and indoor ambient temperature.

2

▲

① .

Running temperature setting of indoor unit, range :16~30°C

② .

Timer setting, range:0.5-24hr

③ .

Air function setting

④ .

Save setting

⑤ .

Clean setting

6

▼

3

Fan

Select fan speed from high, mid-high, middle, mid-low, low and auto 
levels.

4

Mode

Selection of the COOL, HEAT, FAN or DRY mode.

5

Function

Switchover among these functions of SWING/AIR/SLEEP/HEALTH/
I-DEMAND/VACATION/TURBO/SAVE/E-HEATER/BLOW/QUIET

7

Timer

Timer setting

8

On/Off

Turn on/off indoor unit

4 mode 

and 2 ▲

Memory

Press Mode and ▲ at the same time for 5s under the OFF state of the 

unit to activate/deactivate memory function (If memory is set, indoor unit 
will resume original setting state after power recovery. If not, indoor unit is 
defaulted to be OFF after power recovery. Memory function is defaulted to 
be ON)

2 ▲

and 6 ▼

Lock

Under the ON state of the unit without any malfunction or under the OFF 

state of the unit, press ▲and ▼ buttons at the same time for 5s to go to 

the lock state. In this case, any other buttons won’t respond the press. 

Repress ▲ and ▼ again for 5s to quit the lock state.

4 mode

and 6 ▼

°F/°C

Under the OFF state of the unit, press the Mode and ▼ at the same time 

for 5s to switch the temperature scale between Celsius and Fahrenheit.

Содержание ASC-XXAIN





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды