Sinbo SSW 101, Инструкция по эксплуатации

Страница: 22 / 48

- 21 -
USING
c. When the Bobbin (29) is full [1/16” from the edge of the Bobbin (29)], turn off the machine.
d. Remove the Bobbin (29) from the Rewind Thread Spindle (3).
e. Insert the Bobbin (29) into the Bobbin compartment following the instructions for
“Bobbin Placement” and “Getting Started.”
TROUBLESHOOTING GUIDE
The stitches got looser and looser as I sewed.
The thread has come out from between the discs behind the Thread Tension Knob.
Rethread the machine.
The thread breaks during stitching.
The thread is tangled or has an extra loop. Rethread the machine.
The stitches look all right on the top side but they don’t hook together on the underside.
Do not pull on the fabric as you stitch.
The big thread spool falls off during stitching.
1. Check to be sure you have the white spindle cap on the end of the spool.
2. Be sure the Spindle is tightened into the machine.
The machine has no power.
1. Check to be sure the batteries are inserted correctly. Follow the +/- signs on the inside
of the Battery Compartment.
2. Check to be sure the batteries are not weak.
The machine sews very slowly.
1. Check to be sure the batteries are not weak.
2. Check to be sure the spindle cap is not holding the thread spool too tightly.
3. Sewing a thick cloth will cause the machine to run more slowly.