Sinbo SHC 4354, Руководство по эксплуатации

Страница: 8 / 41

- 7 -
3. While push the adjustment wheel, there are 9 positions to control the cutting length
(3/4.5/6/7.5/9/40.5/12/13.5/15mm or 18/19.5/21/22.5/24/25.5/27/28.5/30mm)
Maintenance of the blades
1. Handing the hair clipper in obverse, then push the blade out of the machine, and then use the cleaning
brush to wipe off the scraps among the blade. Lubricating the space between the stationary and moving
blades with 2 or 3 drops of oil .
2. Clean the blade after using every time in time. When resetting the blades, please press the full parts
until hearing the “KA” sound.
When charging
Please don’t charge if the temperature is lower than 0°C or higher than 40°C.
Please don’t charge if it is nearby the sunlight perpendicular incidence or the heat source radiates.
The standard charging time is 8 hours. In order to avoid mangling the batteries, please don’t extend
the charging time.
Cautions
Cleaning the housing using only a cloth slightly dampened water or a mild soap solution.
Never use a caustic solution.
Never submerge the clipper in water.
Keep away from the children.
This clipper may become warm during operating and/or charging, this is normal.
When using, don’t hold the power soft line, in order to prevent possible harm and so as to avoid accidents
Never tamper with moving parts.