Sinbo SFH 6929, Инструкция по эксплуатации, Страница: 4 / 10

- 3 -
to the power indicated on the rating label.
4. Heat temperature setting can be regulated using the switch located on the top of the
heater. This switch is use for both the fan and heat elements. Note the fan speed cannot
be altered and will always remain constant. To turn the application on:
* Fan-for a lower power air circulator; Turn the dial on the right clockwise, once for the
fan function
* Low-Turn it twice for the Medium heat setting (1000W). The setting is best suited for
smaller, well-insulated areas that require less warning.
* High-Turn the switch once more for High setting, or full power (2000W).
Which delivers rapid warm air to increase the temperature to a given area.
OVERHEATING SAFETY DEVICE
Your heater is fitted with a safety device that switches off the heater in the event of
overheating.
Should the heater stop working, turn the heater off and inspect of blockage of inlet or
outlet. Wait at least 5 minutes of the protection system to reset before attempting to
restart the heater.
If the heater fails to operate the safety device switches the heater off again, return the
heater to your nearest service center for examination or repair.
CLEANING YOUR FAN HEATER
1. Always disconnect the appliance from the main supply before cleaning.
2. Clean the outside of the heater by wiping with damp cloth and guff with a dry cloth.
3. Do not use benzene or any other detergents/solvents or chemical agents to clean the
heater.
SERVICE
Hints before returning the appliance:
Is your household socket working properly?
Are all required switches in the “ON” position?
Ensure that the plug is firmly in the socket and switched on.
Ensure the heater if standing on an even surface.
NOTE: If the power supply cord or plug is damaged, an Amalgamated Appliance service
center or an official agent must replace it.
If service becomes necessary with the warranty period the appliance should be returned
to an approved service center. Servicing outside the warranty period is still available,
however it will be chargeable.