SIN.EQRPT868XT
–
User Guide Rev. 1.6
S I N A P S I S . r . l . |
V i a d e l l e Q u e r c e 1 1 / 1 3 - 0 6 0 8 3 B A S T I A U M B R A ( P G )
–
I t a l y
T . + 3 9
0 7 5 8 0 1 1 6 0 4
- F . + 3 9
0 7 5 8 0 1 4 6 0 2 |
w w w . s i n a p s i t e c h . i t
-
i n f o @ s i n a p s i t e c h . i t
9
4.3
Accept mode activation ALL - SIN.EQRPT868XT
a)
It is used when the commissioning is carried out after with respect to the installation of the heat
cost allocators
b)
To activate the accept ALL mode on a newly installed SIN.EQRPT868XT
1.
Press button 2 (2s. < T < 6s)
2.
When pressing button 2, the LED (8.1) flashes every second. When the key 2 is released, the LED
(8.1.) remains lit to indicate the activation of the accept ALL mode.
3.
RPT receives and takes charge of all devices transmitting in W.M-Bus including frames in
Installation Mode (SND_IR) - The first green LED lights up permanently - Scan duration without
user intervention 12 hours
4.
press the button 2 (no coded pressure time) to stop the scan manually
Note: if during the scan the RPT connects into the MESH network the mode of operation will automatically
change with the value set on the RTU.
