background image

Simrad - RS12 Operation and Installation Instructions

23

1. 

Select RADIO SETUP, then INT 

SPEAKER.

2. 

Select ON (on) or OFF (off ) then 

press ENT to enable the setting and 

return to the menu. 

3-6 Set the Priority Channel (WATCH MODE)

For EU models, watch mode is similar to a dual watch, scanning between the priority channel 
CH16 and the working channel. If you have US model and are operating on USA or Canadian 
channel banks, you can set the priority channel to cover both CH16 and CH09 as well as the 
working channel, as follows:

1. 

Select RADIO SETUP, then WATCH 

MODE.

2. 

Select ONLY 16CH for dual watch mode, 

or 16CH+9CH for tri watch mode.

3-7 Weather Alert (Wx ALERT) 

US models ONLY

The NOAA provides several weather forecast channels on USA and Canadian channel banks. 
If severe weather such as storms or hurricanes are forecast, the NOAA broadcasts a weather 
alert on 1050 Hz. You can set up the radio to pick up weather alerts, as follows:

1. 

Select RADIO SETUP, then WX ALERT.

2. 

Select ON (on) or OFF (off ) then 

press ENT to enable the setting and 

return to the menu.

When a weather alert is broadcast, the alarm will sound. Press any key to hear the weather 
alert voice message.

3-8 NMEA protocol (COM PORT)

This radio uses NMEA0183 protocol to receive GPS data from a compatible GPS unit. The COM 
Port must be configured correctly before use.  The radio can be added to a group of instru-
ments using NMEA protocol.

1. 

Select RADIO SETUP, then COM PORT.

2. 

Select  CHECKSUM ON (on) or OFF 

(off ) then press ENT to enable the 

setting and return to the menu.

CHECKSUM ON is the default setting. 

The COM Port uses 4800 baud rate and can receive the following GPS data sentence: RMC, 
GGA, GLL, GNS. Additionally, this radio will output the following NMEA DSC data: DSC (for 
DSC call), DSE ( for enhanced position).

WX ALERT
 ON

OFF

  

RADIO SETUP
 INT SPEAKE

 WATCH MODE

WX ALERT  

RADIO SETUP
 WATCH MODE

 WX ALERT

COM PORT

NMEA 
CHECKSUM

ON

 OFF

RADIO SETUP
 KEY BEEP  

 INT SPEAKER

WATCH MODE

WATCH MODE

ONLY 16CH

 16CH+9CH

INT SPEAKER

ON

 OFF

RADIO SETUP
 RING VOLUM

 KEY BEEP

INT SPEAKE

Содержание RS12 VHF









































































Отзывы: