Simrad RS12 VHF, Руководство пользователя

Страница: 12 / 72

Simrad - RS12 Operation and Installation Instructions 12
PAUSE DISTRESS CALL mode only:
Pause the automated distress alert resend countdown
timer.
SCAN Scan
Press to scan between your current channel and the priority channel in
DUAL
or
TRI WATCH mode. The weather channel is also scanned if the USA channel bank is
selected and the weather alert mode (ALT) is ON.
Hold down SCAN to enter
ALL SCAN
mode where the priority channel is checked
every 1.5 seconds.
When a signal is received, scanning stops at that channel and
BUSY
appears on
the screen. If the signal ceases for more than 5 seconds, the scan restarts.
Press ENT to temporarily skip over (lock out) an “always busy” channel when in ALL
SCAN mode and resume the scan. If a channel is skipped, the word ‘SKIP ON’ will
momentarily replace the channel name shown on the LCD to designate a skipped
channel. The channel name will then have ‘ *’ appended to the end of the channel
name. Note that it is not possible to skip over the priority channel.
To cancel a skipped channel, select the channel while in normal mode (non-scan
mode) then press the ENT key - ‘SKIP OFF’ will be displayed momentarily and the
channel will be restored. Alternatively, you can re-power the radio.
Press SCAN to stop at the current channel.
Press ESC to cancel scan mode and return to normal operation.
DISTR. CANCEL DISTRESS CALL mode only:
Press to send a distress cancel call.
CH + / - Channel Select
Also located on the handset mic. The current channel is shown on the screen in BIG
digits with an appropriate designator suffix A or B in small letters below the channel
number (if applicable).
Press + or - to step through the available channels one at a time, or hold down to
scroll rapidly through all the available channels.
See Appendix C for a complete listing of channel charts.
Alphanumeric Entry
This key can be used for both menu selection and for alphanumeric entry. Press + or -
to scroll the cursor up or down to menu options when navigating menus.
When editing an item containing only numbers, press
-
to count through the numbers
or hold down to scroll rapidly.
To enter a character, press
+
to step through the alphabet or hold down to scroll
rapidly.
SILENCE DSC Call mode only:
Press + or - key to silence the call alert when a DSC call is
received.
DIM Dim
Press to Dim the LCD and keypad lighting. There are 8 levels from OFF to full
brightness.