manualshive.com logo in svg

Simrad NSS evo2, Руководство оператора

Поделиться
Скачать
Simrad NSS evo2 Скачать руководство пользователя страница 97

Maintenance

Preventive maintenance

The NSS evo2 unit does not contain any field serviceable components, therefore the operator
is required to perform only a very limited amount of preventative maintenance.
It is recommended that you always fit the supplied protective sun cover when the unit is not
in use.

Cleaning the display unit

The supplied cleaning cloth should be used to clean the screen, where possible. Use plenty
of water to dissolve and take away salt remains. Crystalized salt may scratch the coating if
using a damp cloth. Apply minimal pressure to the screen.
Where marks on the screen can’t be removed by the cloth alone, use a 50/50 mixture of
warm water and isopropyl alcohol to clean the screen. Avoid any contact with solvents
(acetone, mineral turpentine etc.), or ammonia based cleaning products, as they may
damage the anti-glare layer or plastics bezel.
To prevent UV damage to the plastic bezel, it is recommended that the sun cover be fitted
when the unit is not in use for an extended period.

Cleaning the media port door

Clean the media port door regularly to avoid that salt crystallize on the surface, causing water
to leak into the card slot.

Checking the keys

Make sure that no keys are stuck in the down position. If one is stuck, wiggle the key to free it
back to normal.

Checking the connectors

The connectors should be checked by visual inspection only.
Push the connector plugs into the connector, if the connector plugs are equipped with a
lock; ensure that this is in the correct position.

NMEA 0183 Data logging

Enter a short description of your concept here (optional).

All serial output sentences sent over the NMEA 0183 TCP connection are logged to an
internal file. You can export and review this file for service and fault finding purposes.
The maximum file size is predefined. If you have added several other files to the system
(sonar and/or StructureMap recordings, music, pictures, pdf files), this may reduce the
allowed file size for the log file.
The system logs as much data as possible within the file size limitation, then it starts
overwriting the oldest data.

20

Maintenance

| NSS evo2 Operator Manual

97

Содержание NSS evo2





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды