Simrad NSS evo2, Руководство оператора

Страница: 59 / 100

Zooming an Echosounder image
You zoom an Echosounder image by:
• turning the rotary knob
• using the panel zoom icons
• by pinching or spreading on the screen
Zoom level is shown on the upper left side of the panel.
When zooming in, the sea floor will be kept near the bottom of the screen, irrespective of
whether it is in auto-range or manual range.
If the range is set considerably less than the actual depth, the unit will not be able to find the
bottom when zooming.
If the cursor is active, the unit will zoom in where the cursor is pointed.
Zoom bar
The zoom bar will be displayed when you zoom the echosounder image.
Drag the zoom bar vertically to view different parts of the water column.
Using the cursor on the echosounder panel
The cursor can be used to measure a distance to a target, to mark a position, and to select
targets.
The cursor is by default not shown on the echosounder image.
When you tap the screen the depth at the cursor position will be shown, the information
window and the history bar will be activated.
To remove the cursor and cursor elements from the panel, select
Clear cursor
or press the
X
key.
GoTo cursor
Enter a short description of your concept here (optional).
You start navigating to a selected position on the image by tapping the screen, then using
the go to cursor option in the menu.
The Cursor assist function
Enter a short description of your concept here (optional). The cursor assist function allows for fine tuning and precision placement of the cursor
without covering details with your finger.
Press and hold your finger on the screen to switch the cursor symbol to a selection circle,
appearing above your finger.
Without removing the finger from the screen, drag the selection circle over the desired item
to display item information.
When you remove your finger from the screen the cursor reverts to normal cursor operation.
Measuring distance
The cursor can be used to measure the distance between the position of two observations
on the image.
It is easier to use the measuring function when the image is paused.
1. Tap the item from where you want to measure the distance
2. Start the measuring function from the menu
3. Tap on the screen to select the second measuring point
- A line will be drawn between the measuring points, and the distance will be listed in
the Information window
4. Continue tapping the screen to position new measuring points
You can use the menu to re-position the start point and the end point as long as the
measuring function is active.
When you select
Finish measuring
or press the
X
key, the image will resume to normal
scrolling.
Echosounder | NSS evo2 Operator Manual
59