8 |
Introduction |
MX610/MX612 Operator and Installation Manual
MX610/MX612 Screens
1
Instrument Bar
Navigation data is contained on the bar on top of the PLOT page. The PLOT is under the
AIS
key.
2
Plotter Orientation
Possible orientation of the plotter is North Up or Course Up.
3
Ship’s location
Always located in the middle of the plot screen.
4
Status Bar
Appears on all navigation screens. It indicates the GPS and RAIM status or if an alarm is pres-
ent (refer to Status bar indications below for more details). Normally, the status bar blinks off
every 4 seconds to show what is behind it. This is not an alarm condition.
5
Main Menu
The main menu is used to operate the system and to adjust configuration settings. There are
two tabs under the main menu, namely: Settings and Tools. To toggle between the Tools and
Settings tab, press the
PAGE
button.
6
Alarm Icon
The system will continuously check for dangerous situations and system faults while the sys-
tem is running. When an alarm situation occurs, an Alarm bell icon will appear on the status
bar.
If you have enabled the siren, an audible alarm will be activated when an alarm situation oc-
curs.
1
4 6
2
3
5
www.busse-yachtshop.de | [email protected]
