Simrad HS52 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 80

background image

OPERATING INSTRUCTIONS

20222360 / E

49

The alarm page includes information of the last three alarms on
the system. For each alarm time, type of alarm and identification
code for the alarm is presented. Below each alarm a description
of each identification code is displayed.

Software version for each unit (Distribution Unit =

DU

, Sensor

Unit =

SU

and Processing Unit =

PU

), together with internal

serial number for Sensor and Processing unit. The date behind
each unit’s software version refers to manufacture date for the
unit.

System load as a percentage of used CPU capacity in the
Processing unit is presented in the system information, together
with Sensor unit status. The Sensor unit status is mainly used by
service personnel.

4.4

Alarms

The Simrad HS52 will generate three types of alarms. These are
position, heading and no data alarm.

It is possible to enable the heading alarm and the position alarm
individually and to set all alarms enabled or all alarms disabled.
The no data (lack of data) alarm will be enabled as long as any
alarm is enabled. The alarm setup is available from the Expert
setup menu.

From the same menu it is also possible to enable or disable use
of the alarm sound on and off. The sound, if enabled, will be
present as long as the alarm condition is present, and the alarm
is not acknowledged. To comply with the IMO approval the
alarm switch has to be connected to an external alarm panel. It is
then recommend disabling the internal Display unit alarm sound.
For description of how to connect an external alarm to the
Processing unit, see

External Alarm

on page 25.

A no data alarm occurs when the Processing unit has not
received data from any sensor the last second.

A position alarm occurs when the position is invalid. The reason
for invalid position might be too few available satellites or that

«
...
55
56
57
58
59
...
»

Содержание HS52

















































































Отзывы:

Нет отзывов

Похожие инструкции для HS52

Бренд: Samsung Страницы: 60

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 24

Бренд: Samsung Страницы: 22

Бренд: Samsung Страницы: 23

Бренд: Jensen Страницы: 2

Бренд: PURE Страницы: 88

Бренд: Salus Страницы: 41

Бренд: VocoPro Страницы: 26

Бренд: Garmin Страницы: 74

Бренд: Daewoo Страницы: 44

Бренд: ION Страницы: 16

Бренд: Solda Страницы: 22

Бренд: RCA Страницы: 2

RS2181i/RS2181iF

Бренд: RCA Страницы: 1

RS2052 - Compact Bookshelf System

Бренд: RCA Страницы: 20

Бренд: RCA Страницы: 26

Бренд: GE Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды