Simrad HS52, Инструкция по эксплуатации

Страница: 35 / 80

INSTALLATION
20222360 / E
27
The arrow buttons are also used to return from a submenu to the
SETUP menu.
Note! Activate and Discard selection together with the rotary knob are
used to exit the SETUP menu: changes are accepted by using
Activate , and all changes are erased when selecting Discard .
Example:
The following example shows how to change the ROT Max
value in the Display adjustment submenu using the keys and
the rotary knob:
1) Press the
SETUP
key for 5 seconds until the Setup menu
appear on the screen.
2) Select Display adjustment by turning the knob clockwise
3) Press the arrow down key until the cursor is at the ROT
Max position
4) Turn the knob to left or right until wanted value appear on
the screen
5) Press the
SETUP
key to get back to the main menu
6) Press the arrow down key until the cursor is at the Activate
position and then turn the knob clockwise. Then the new
setup is activated.
Display Adjustments
In the Display adjustments submenu the backlighting and
contrast of the display are adjusted. The format for velocity
(knots or m/s) and resolution on position displayed may be
specified, together with the maximum rate of turn (ROT) value
to be shown on the display. Default value for ROT is 20°/s.
When navigation information (NAV1 or NAV2 menu, refer
page 45) are selected, the display backlighting may be increased
or decreased by using the rotary knob.