60
922-00027001/2.2
Configuring the sensors
Topics
Setting up the catch monitoring sensors, page 60
Improving the catch monitoring sensor receive signal, page 62
Improving the Trawl Unit sensor readings, page 63
Setting up the catch monitoring sensors
The FM90 supports up to six measures on six channels.
Prerequisites
• The physical installation of your PI/PX catch monitoring sensors must be complete.
• The Sonar Head must be running to do this procedure. If not, the
Sensor Setup
icon
will be greyed out.
Context
The
Fish Sensors
page is the first tab in the
Sensor Setup
dialog box. This page allows you to
define which PI/PX catch monitoring sensors shall be used with the FM90 system.
Procedure
1
Click the
Sensor Setup
button.
This button is located on the top bar.
Observe that the
Sensor Setup
dialog box opens.
2
Select the
Fish Sensors
tab.
3
Select each sensor you want to set up (from sensor one to six) and click the
Add
Measure
button to add a measure for each sensor.
4
Set the sensor properties for each measure that you add.
a
Select the
Update Rate
for the catch monitoring sensor.
This parameter is used to select how often the FM90 can expect to receive
information from the sensor. A faster update rate gives you information more
often, but will decrease the battery life.
Simrad FM90 Reference Manual
Содержание FM90
Страница 2: ......
Страница 140: ... 2018 Kongsberg Maritime ...