Simrad FishNet 144, Инструкция по эксплуатации

Страница: 19 / 70

G210–54/1
17
Operating procedures
Topics
Setting up the radio site for operation, page 17
Creating a new radio network, page 22
Joining a radio network, page 25
Editing an existing radio network, page 26
Adding or removing third party equipment, page 28
Checking the status of the MBR network, page 29
Setting up the radio site for operation
The setup is done using a wizard. A radio site is one or several radio units connected
together on one location. A
radio network
is a network of radio sites. You must set up the
radio site before you can start the radio network configuration. All configuration of the
FishNet 144 Maritime Broadband Radio (MBR) is done through the web interface.
Prerequisites
The IP address for the Radio Unit is located at the bottom of the Radio Unit. You must
have enabled contact with the Radio Unit.
The IP address and the MAC address for the third party equipment must be known.
Context
The FishNet 144 Maritime Broadband Radio (MBR) uses static layer 2 bridging (OSI model
- Open Systems Interconnection Basic Reference Model). Therefore it needs both the IP
address and the MAC address of the equipment in order to establish an IP connection.
Procedure
1 On the
Welcome
page, which appears after you have enabled contact with the Radio
Unit, select
Configure site
to start the installation wizard.
Operation