Simrad FishNet 144, Инструкция по эксплуатации

Страница: 30 / 70

28
G210–54/1
Adding or removing third party equipment
If you want to communicate with other types of equipment, for example sensors, you can
add this equipment to your radio site. When third party equipment is no longer in use
on your site, you can remove it.
Procedure
1 Select the
System menu
button, , in the top right corner of the display to open the
System
menu.
2 Select
Site
to enter the
Configure site
page.
3 Select the
Manage third party equipment
button to open the
Third party equipment
dialog box.
4 Type the IP address of the equipment you want to connect. Select equipment type from
the drop-down list. Type a description of the equipment for identification purposes.
If the third party equipment is switched on, the MAC address appears automatically.
If not, type the MAC address.
Select
Add
to add the equipment.
5 To remove third party equipment, select the X symbol at the end of the line.
6 Continue for all the equipment you want to add or remove. Select
OK
to close the
dialog box.
FishNet 144 Instruction Manual