Simrad CA34, Руководство пользователя

Страница: 38 / 212

Chapter 3-12 CA34/44/54 Radar menu
Use cursor to activate and move the cross cursor on the radar back-
ground
- press [CLR] to remove cursor.
EBL
Activate EBL-VRM1, and use cursor to move EBL-VRM1 around
in the radar background - more details further ahead in this section
- press [EBL] again, or [CLR] to remove EBL-VRM1.
ADJ
Open for adjustment
Use cursor to move around in the control panel
+/-
Toggle between available values
0-9
Key in new values
ENT
Confirm changes by pressing [ENT] (or [MENU] )
There is no regret or “exit without making any change”-key from the
control panel. As soon as the keys are pressed to change a function,
the actual change is immediately carried out.
Orientation can be set to:
HU RM
(Head-Up in Relative Motion): The heading line always
appears on the display at 0 degrees as the antenna beam passes the
bow of the vessel. Targets appearing on the display are relative to
your own ship. Head-up mode gives an easy interpretation of the
situation around your boat.
NU
(North-Up): In this mode, targets are displayed at their measured
distances and direction relative to north. North being at the top of
the display. To operate in NU mode will require valid heading from
connected compass.
CU (Course Up): The heading line appears to point upwards within
the range of the rotation resolution (default is 15°). If the vessel turns
more than e.g. 15°, the radar picture will also turn to make the head-
ing line continue pointing upwards.
TM
(True Motion): Own ship moves past land, buoys and fixed
objects. To operate in TM mode will require valid GPS position and
compass heading.