Instruction manual
20220927 / D
11
4
INSTALLATION
4.1.
General information
Care should be taken when unpacking and handling the
equipment. A visual inspection should be made to see that the
equipment has not been damaged during shipment and that all
components and parts are present.
4.2.
Location of the unit
The analog repeater should be mounted where it is most
convenient for the user, and with regard to the unit’s
environmental protection and temperature range. The unit
should not be installed in area exposed to heavy vibrations.
Make allowances for working area around the unit when routing
or removing the cable.
4.3.
Mechanical installation
Refer dimensional drawings on page 8 and page 9.
Bulkhead mounting
NW
SW
SE
NE
pfjo^a=^oSU
pfjo^a
1.
Locate the cradle on the mounting site and mark the
holes for the fixing screws on the mounting surface.
2.
Drill the mounting holes and screw the cradle to the
mounting surface.
3.
Assemble the AR68/AR77 to the cradle with the
two knobs and adjust the unit to obtain the best
viewing angle.
