Step 6
6
Step 7
B
Once you have checked that the door opens and closes
correctly fix the glass panel frame to the wall channel.
From inside, drill 3 holes through the wall channel/glass panel
frame using a 3.2mm drill bit and Drill Jig (Y). Fix using
washers (D), screws (C) and push on the screw covers (E).
D,C,E
Y
Place the breakwater bar (V) and the two end parts - RH (R, T)
or two end parts - LH (S, U)
on the shower tray.
Using a pencil mark the outline after adjusting the 3 parts fit for the shower tray and door glass.
Spread silicone sealant under the 3 parts, put them on the shower tray following the marked line.
R
T
V
c
d
b
a
Lmm
L+20 mm
V
V
R
T
