Simpson PelletVent Pro, Руководство по установке

Страница: 11 / 24

11
Figure 12
Figure 13
Figure 14
of the stove with clamp provided. Only connect
metal flex to the appliance; do not substitute
or install plastic flex. The cover plate comes
installed on the lower left corner of the thimble
with intake guard pointing downward to deflect
rain. If it is desired to rotate thimble and air
inlet to another corner, remove the (2) screws
on the inlet guard and re-attach over air inlet
at new location. Secure black interior half of
the Wall Thimble to the interior wall, and the
unpainted exterior half are to be secured to the
exterior wall on both styles of thimbles (Figure
13) . The Wall Thimbles adjust to fit walls from
4”-8” thick. For installation in thicker walls an
extension tube may be field fabricated.
C. Connect a Pipe Adapter and Pipe Section
together then seal connection to rear exhaust
outlet. Attach a Single Tee with Clean out
adapter or a Double Tee with Clean-Out
Adapter, and proceed attaching Pipe Sections
up the wall. Installing a Double Tee with
NorthlineExpress.com http://www.northlineexpress.com Toll-Free 1-866-667-8454