19 - ENG
5. Squeeze bottle to inject contents into pump.
6. With ignition switch off, simultaneously pull starter rope and squeeze bottle.
Repeat until protector fluid exits pump outlet.
NotE:
This step may require
two people.
pRESSURE WASHER
1. Drain all water from high pressure hose and wrap it onto hose wrap.
2. Drain all water from the spray gun and wand by holding spray gun in a vertical
position with nozzle end pointing down and squeezing trigger. Store in gun
holder.
3. Wrap up and secure detergent siphon hose so it is protected from damage.
ACCESSORIES
DANGER: Risk of fluid injection. When using replacement spray wands or
guns with this pressure washer, DO NOT use a spray wand and/or spray gun/
wand combination that is shorter in length than what was provided with this
pressure washer as measured from the nozzle end of the wand to the gun
trigger.
NOTICE:
The use of any other accessory not recommended for use with this tool
could be hazardous. Use only accessories rated equal to or greater than the rating
of the pressure washer.
SpECIFICATIONS
Model
Ms60773
PSI Max*
2800 psi
GPM Max*
2.3 gpm
High Pressure Hose
25 ft. (7.6 m)
Presure of Inlet Water
20–100 psi
Inlet Water
cold tap
Soap Consumption Rate
10% max
* Pressure and Flow Ratings tested in accordance to PWMA standards.
In a continued commitment to improve quality, the manufacturer reserves the right
to make component changes, design changes, or specification changes when
necessary and without notice.
SERvICE INFORMATION
Do not return this product to your retailer.
Please contact our customer service
department at www.simpsoncleaning.com
LIMITED WARRANTY
90 DAY LIMITED WARRANTY ON pRODUCT COMpONENTS EXCLUDING pUMp
SIMPSON
®
warrants to the original purchaser that the wheels, gun, hose, wand, spray
nozzle(s) and other components of the
SIMPSON
®
pressure washer covered under this
warranty are free from defects in material and workmanship for 90 days from the date
of purchase.
