7
Select and start a washing program
Select the washing program and delay
start with the door slightly opened. The
start of the program or the countdown of
the delay start will occur only after the
closure of the door. Until then it is
possible to modify the settings.
1. Check that the baskets have been loaded
correctly and that the spray arms are free
to rotate
2. Press the On/Off button: all the program
lights illuminate (setting mode).
3. Press the button corresponding to the
required program (see "Washing
programmes" chart).
When a program has been selected the
corresponding light will illuminate.
The indicator lights of the program phases
start flashing.
Close the dishwasher door, the program
starts automatically.
Setting and starting the program with
"delay start"
1. After having selected the washing
program, press the delay start button until
the flashing number of hours for the delay
start will appear in the digital display. The
commencement of the selected washing
program can be delayed from 1 to 19
hours.
2. Close the dishwasher door, the countdown
starts automatically and the number in the
display stops flashing.
3. The countdown will decrease with steps of
1 hour.
4. The opening of the door will not modify or
interrupt the countdown.
5. Once the delay start has elapsed the
program will start automatically.
The selection of the washing program and
delay start can also occur with the door
closed. Keep in mind that in this way, once a
washing program button is pressed you have
ONLY 3 seconds
in which you can choose
another program or select a delay start, after
which the selected program will start
automatically.
Cancelling the "delay start"
To cancel a delay start in progress you have to
reset the dishwasher.
Simultaneously press and hold the two
program buttons positioned over the word
Stop
, until all the program lights illuminate.
Cancelling a delay start also cancels the
selected washing program. In this case you
have to set the washing program again.
Interrupt or cancel a washing program in
progress ONLY if it’s absolutely necessary.
Attention! Hot steam may escape when the
door is opened. Open the door carefully.
Interrupt a washing program in progress:
●
Open the dishwasher door; the program will
stop. Close the door; the program will start
from the point at which it was interrupted.
●
Press the On/Off button, all lights will turn
off. Press the On/Off button again; the
program will start from the point at which it
was interrupted.
156995010.qxp 4/4/2007 12:56 PM Pagina 7