Simpro QUIKSTAK QS10MM, Руководство пользователя

Страница: 30 / 52

4.6.3 Electromagnetic brake
The Quikstak is fitted with an electromagnetic brake manufactured by INTORQ of Germany.
The electromagnetic brake and drive motor (
§4.6.1 ) are both controlled by a Curtis 1212
traction controller ( §4.4.8 ), which allows the use of regenerative braking.
4.6.4 Wheels & bearings
The quality of the wheels and bearings affects the stability and performance of the Quikstak.
When replacing the wheels only OEM parts should be used.
The wheels and bearings should only be serviced or replaced by a qualified technician.
4.6.5 Straddle legs
The Quikstak is fitted with straddle legs, which balance the stacker while allowing pallets with
bottom-boards (such as CHEP pallets) to be lifted from the ground. The legs are mounted
into sleeves at the base of the stacker frame, allowing the straddle width to be adjusted to
suit different operating environments or pallet types.
4.6.5.1 Adjusting the straddle width
Carry out the following procedure to adjust the Quikstak straddle width:
1. Remove the weight of the stacker from the outriggers, by either;
a. Placing a hydraulic jack beneath the front-centre of the stacker frame, and
jacking it up as per
§5.2 until the outrigger wheels are slightly off the ground.
b. Affixing a sling around the crossmember at the top of the mast, and slightly
lifting the entire Quikstak as per
§5.3 .
Never stand or reach beneath the Quikstak while it is lifted or jacked up.
2. Loosen and remove the three 24mm bolts securing each outrigger.
3. Slide the outriggers inwards or outwards as required;
a. To maintain an equal distribution of load, both outriggers should always be
adjusted by the same amount.
b. The pattern of predrilled holes in each outrigger must be correctly aligned
with those in the mounting sleeve before the bolts can be re-fitted. The bolt
holes align in four locations, corresponding to straddle widths of
985mm/1085mm/1185mm/1285mm .
4. Refit and firmly tighten all 24mm bolts before returning the Quikstak to service.
The outriggers can also be removed to minimise volume for shipping.
1030381526
Drive wheel 1030381506 Load wheels 1030381526