FOOTRESTS (IF SUPPLIED)
Footrests are supplied separately to the main commode. Please examine your
footrests for any visible damage before use. If you see any damage or suspect a
fault, please contact your supplier immediately.
In this case, please do not use your product as it may compromise your safety.
1.
Remove the commode footrests from their packaging
2.
You will see on each of the front legs of the commode main frame about
150 mm high from the castor 2 retaining lugs either side
3.
Take the footrests and align the holes in the
inverted ‘U’
section with the
lugs and lower down into place.
4.
Rotate the footrests towards the commode so that they clip into place.
USE OF THE COMMODE
When moving always lift the commode by placing your hands on the tubular metal
frame beneath the blow molded seat.
•
Do not allow children or unauthorised persons to play with or use the
commode.
•
Do not rock back and forth or sideways when using the commode as this
will cause excessive stress and possible damage and failure which may
cause injury.
•
Do not use the commode outside the home or on uneven surfaces (such
as in the garden) as this will cause stress to the legs and possible damage
which may cause injury. It is not intended as a wheelchair.
•
Do not place fingers or foreign objects into any of the exposed tubular
sections as this can lead to serious injury.
•
When operating the brake mechanism, do not stamp on the lever as this
may cause damage to the mechanism and possible failure.
•
Not for use in the shower. Dry immediately if the commode becomes wet.
