8/15
ASSEMBLY
STEP 1
1. Insert 4 Dowels 3 into pre-drilled holes on each Side B .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be exposed.
3. Attach 4 Cam Lock Pins 2 to Side B into guide holes.
4. Align and insert Cam Lock Pins on Side B into pre-drilled holes on
Front C and Back D .
5. Place 4 Cam Locks 2 into pre-drilled holes on Front C and Back D
( 2 Cam Locks / each part ).
6. Attach Front C and Back D to Side B using 4 Allen Key Screws 1 through pre-
drilled holes ( 2 Screws / each part ).
7. Use a flathead screwdriver to tighten Cam Locks into Pins.
8. Use Allen Key 4 to tighten screws. Do not over-tighten.
MODEL
# 3AXCCON-0
3
