SimpliFire SF-SC43-BK Скачать руководство пользователя страница 16

Страница: 16 / 21

SimpliFire • SF-SC43-BK, SF-SC-55-BK, SF-SC78-BK • 2041-980 • 1/19

D. Resetting Temperature Cutoff Switch

The heater is protected with a safety device to prevent

overheating. Should the heater overheat, an automatic

cutoff will turn the heater OFF. It will not turn ON auto

matically without being reset. If it overheats for any rea-

son, it can be reset by:

1. Turn appliance to OFF.

2. Shut-off power at the circuit breaker.
3. Wait 30 minutes.

4. Turn on power at the circuit breaker.
5. Turn on appliance with manual switch or remote control.

CAUTION:

If appliance overheats repeatedly, discon-

tinue use and call customer / technical support.

CAUTION:

If you need to continuously reset the heater,

contact your dealer for service.

C. Room Temperature and Thermostat

Function

The temperature display on the remote control is a set

point for the desired temperature of the room in which

the appliance is installed. The Thermostat button on the

remote can be used to set the desired room temperature.

The heater will only operate if the remote control tem

perature set point is higher than the actual room tempera-

ture. The heater will not operate if the actual temperature

is greater than the remote control temperature set point.

This function can also be used as a thermostat, under the

following conditions:
• When the remote control display is set to a desired

room temperature using the thermostat button, the

appliance heater will turn OFF automatically when

the room temperature reaches the set point.

•

The heater will turn ON automatically if the room tem

perature falls below the set point.

Note:

The actual room temperature is measured by a

hidden sensor located behind the glass front of the appli-

ance. During certain situations, this sensor temperature

can be slightly different than either the remote control lo-

cation, or the overall space being heated. For this rea-

son, the remote control set point temperature may need

to be set slightly higher or lower than expected room tem-

perature for the heater function to work as desired.

Содержание SF-SC43-BK






















Результаты поиска

Содержание SF-SC43-BK

Отзывы:

Похожие инструкции для SF-SC43-BK

Бренды по названию

Популярные бренды

SimpliFire SF-SC43-BK, Руководство пользователя

Результаты поиска

Содержание SF-SC43-BK

Отзывы:

Похожие инструкции для SF-SC43-BK

Бренды по названию

Популярные бренды