5 / 9
SERVICE
1
2
TX
RX
DC 24V
HDMI OUT
IR IN
IR OUT
RS-232
3
4
5
6
7
8
9
10
9
IR IN
IR input port for receiving the signal of IR remote.
10
IR OUT
IR output port for control of source device. This IR output
signal is from the IR IN port of the receiver.
11
RS-232
3-pin Phoenix connector, connect to a PC or control system
for RS-232 command pass-through.
12
MODE switch
Use the switch to set different application scenarios:
11: eARC mode under amplifier control, the TV connected to
the receiver supports CEC control, but the Audio OUT doesn’t
support CEC control.
01: eARC/ARC mode under extender control, both the TV
connected to the receiver and the Audio OUT support CEC
control.
00: ARC mode under amplifier control, the TV connected to the
receiver supports CEC control, but the Audio OUT doesn’t
support CEC control.
10: eARC/ARC is unsupported.
5.2
Receiver Panel
No.
Name
Function Description
1
Power LED
Red LED will be on when the receiver is powered on.
2
SERVICE port
Firmware update port.
3
DC 24V
DC 24V/1A power supply input port.
Note that the extender supports POC function, it means that
either transmitter or receiver is powered on by 24V/1A power
adapter, the other one doesn’t need power supply.
4
CAT IN
RJ45 connector for connecting the CAT OUT port of
transmitter with a CAT 5e/6 cable.
CAT
IN
