POST MOUNTED BOTTOM RAIL END: The bottom rail on a
fl at surface terminates into a railing post using a
$(
.
BOTTOM RAIL HANDRAIL END: Connect the bottom rail to the wall
with a
$(
wall fl ange.
BOTTOM RAIL VERTICAL CHANGE: The vertical change on
the bottom rail of a ramp is typically done using a
$(
.
HANDRAIL RAILING END: Mount the
$(
to the wall. The handrail
or mid-rail tube is then connected to this fi tting using a
%%"
.
$(
$(
$(
%%"
$(
%%"
$(
$(
POST MOUNTED RAMP BOTTOM RAIL END: The bottom
rail on a ramp terminates into a railing post using a
$(
.
When the set screw is tightened, the angle of the bottom rail
will be fi xed.
HANDRAIL BRACKET ATTACHMENT: Brackets attach to the handrail
tube with two No. 12 self drilling screws or pop rivets. Use high
quality hardware for the best results.
APPENDIX: ADDITIONAL DIAGRAMS
For assistance visit: www.simplifi ed
CVJMEJOH
co.uk/solutions/dda-handrail/ or call 0844 335 8460
6
